Manitou MT 732, Руководство оператора

Страница: 73 / 138

20 - HYDRAULIC CONTROLS AND TRANSMISSION CUT-OFF
Do not attempt to alter the hydraulic system pressure. In the event of suspected malfunction, contact your dealer. ANY ALTERATION MAY
RENDER THE WARRANTY NULL AND VOID.
Use the hydraulic controls carefully without jerking, to avoid accidents caused by shaking the lift truck.
MT 728 Série C-E2
MT 928 Série C-E2
LIFTING OF THE LOAD
- The lever A or B backwards when lifting.
- The lever A or B forwards when lowering.
TILT OF THE CARRIAGE
- The lever B to the left for reverse tilt.
- The lever B to the right for forward tilt.
TELESCOPING
- The lever A to the right for the extension.
- The lever A to the left for the retraction.
NOTE : Only for MT 928 Série C-E2
When completely retracting the telescopes,
insistently operate the control so as to allow all the
telescopes to retract fully.
TRANSMISSION CUT-OFF
- Button C (see: 2 - DESCRIPTION: 5 - SWITCHS PANEL).
REVERSING GEAR
- Switch D (see: 2 - DESCRIPTION: 17 - REVERSING GEAR).
MT 732 Série C-E2
MT 732 Turbo Série C-E2
MT 932 Série C-E2
MT 932 Turbo Série C-E2
LIFTING THE LOAD
- Move lever A or B backwards to lift.
- Move lever A or B forwards to lower.
TILT OF CARRIAGE
- Move lever B to the left to excavate.
- Move lever B to the right to tip.
TELESCOPING
- Move lever A to the right to extend.
- Move lever A to the left to retract.
NOTE: Only for MT 932 Série C-E2
When completely retracting the telescopes, insistently operate the control so as to allow all the telescopes to retract
fully.
ATTACHMENT
- Raise lever C and turn to the left or right.
TRANSMISSION CUT-OFF
- Switch D (see: 2 - DESCRIPTION: 5 - SWITCH PANEL).
REVERSING GEAR
- Switch E (see: 2 - DESCRIPTION: 17 - REVERSING GEAR).
N°256456
N°258969
B
A
C
D
B
A
C
D
E
2 - 29