Manitou MT 732, Руководство оператора

Страница: 64 / 138

3 - CONTROL AND SIGNAL LIGHTS PANEL
A - HOURMETER
B - I.C. ENGINE WATER TEMPERATURE
Temperature zone B1 - Blue zone (0° - 50°)
B2 - Green zone (50° - 100°)
B3 - Black/red zone (100° - 105°)
B4 - Red zone (105° - 120°)
NOTE: Red indicator light “J” comes on between zone B3 and B4.
C - FUEL LEVEL
Red zone C1 indicates that you are using the reserve supply and that time of use is limited.
D - TIME DIAL
SIGNAL LIGHTS
When activating the electrical system of the lift truck, all the red lamps and the panel's buzzer must light to indicate their good
working order. If one of the red lamps or the buzzer does not function, carry out the necessary repairs.
RED TRANSMISSION OIL PRESSURE LAMP
The lamp and the buzzer come on when the pressure in the transmission, when driving forward, is abnormally low. Stop
the lift truck and look for the cause (insufficient transmission oil level, internal leak in the transmission, etc.).
NOTE: The signal light operates in forward travel conditions only, the signal should be ignored when the lift truck has stopped
or is idling.
RED TRANSMISSION OIL TEMPERATURE LAMP
The lamp and the buzzer come on when the converter oil temperature is abnormally high. Stop the lift truck and look for
the cause of this overheating.
RED BRAKING OIL LEVEL LAMP
If the lamp and the buzzer come on, when the lift truck is running, stop the I.C. engine immediately and check the braking
oil level. In the event of an abnormal dropping of the level, consult your dealer.
RED PARKING BRAKE LAMP
This lamp comes on when the parking brake is applied.
RED ALTERNATOR CHARGE LAMP
If the lamps E - F - H - I - J - K and the buzzer come on, when the lift truck is running, stop the I.C. engine immediately
and check the electrical circuit as well as the alternator belt.
RED I.C. ENGINE OIL PRESSURE LAMP
If the lamp and the buzzer come on when the lift truck is running, stop the I.C. engine immediately and look for the cause
(see oil level in I.C. engine crankcase).
RED I.C. ENGINE WATER TEMPERATURE LAMP
If the lamp and the buzzer come on when the lift truck is running, stop the I.C. engine immediately and investigate
the cooling circuit for the cause of the malfunction.
3 9
6
12
HOURS
B3 B4
C1
B2 B1
D
B
C
A
2 - 20