Manitou 105 VJR 2, Руководство оператора

Страница: 39 / 70

2 - 21
You must wear a safety helmet for this operation.
NOTE: When the platform exceeds the limits specified on pages 2 to 16, movement in translation (level) is automatically
switched to slow speed.
During movement of the platform (raise, rotate, etc.), keep looking above and about you. Watch out in particular for
electric cables and any other objects that may be located in the volume in which the platform is moving.
S
AFETY DEVICES
When the platform is overloaded, the alarm buzzer sounds continuously, and all movement is stopped, with the
exception of the mast lowering command. If this happens, reduce the platform load.
When the platform reaches the maximum of authorized tilt or slope, the buzzer sounds intermittently and all movements
are blocked except mast and pendular arm lowering.
lowering command. If this happens, re-position the mast to a safe position.
REMINDER - PLEASE REFER TO PAGES 2 TO 5.
L
OWERING THE PLATFORM
When the work has been completed, lower the mast and the arm, returning the machine to the transportation position.
Watch out carefully for people on the ground when lowering the platform
S
TOPPING THE PLATFORM
When the platform is not in use, switch off the electrical supply, with the Base/Platform control centred, and
neutral selected. For even greater safety, switch off the battery supply using the battery isolator switch (Ref.1,
Page 2 to 14).
At the end of the day, re-charge the battery if necessary (see the "Maintenance periodicity" section).