16
TO PLAYBACK AND EDIT
Press PVR key and select
Play / Edit.
Lock:
Select Lock and press OK once, the cursor will highlight a recorded event. Select the event and press OK. The lock
icon will appear on the right of the event. After locking press EXIT. Then store the settings. The event can only be played
back after entering your password.
STORE: After above settings and exiting, move down to STORE and press OK
PVR REMOTE KEYS
PREV:
To cue backwards using a marker. Press repeatedly to move the marker. Then press PLAY again.
NEXT:
To cue forwards using a marker. Press repeatedly to move the marker. Then press PLAY again.
TROUBLE SHOOTING GUIDE
If you suspect there is a problem with your receiver, please check the following trouble shooting guide before
calling a
Manhattan
authorised service agent.
WARNING! Do NOT attempt to repair the receiver yourself. Tampering with the receiver may
result in fatal electric shock and will invalidate your warranty
.
Symptoms --- Possible cause / solutions
Front display not lit ---
Check that the mains lead is plugged into the power socket. Check that your TV is
tuned for the correct UHF channel or is switched to correct AV input.
No picture or sound or any menus ---
No signal. Channel is scrambled. The antenna is not in correct
position. Check LNB wire is not damaged or shorting. Check LNB may be faulty. Unplug receiver from power
socket and retry.
Interference, on picture, using UHF output ---
Local terrestrial TV interference. Change the UHF output
channel to different one then re-tune your TV. Select the appropriate ‘TV Standard’ using TV Settings menu.
Bad picture with blocking or frozen ---
Signal weak or noisy. Check signal quality. Antenna not in correct
position
Not responding to remote control ---
Check the batteries in your remote control. Replace with new.
You have lost or forgotten your password ---
Apply master password or contact your Manhattan dealer.
SPECIFICATIONP
ECIFICATIONS
TUNER
Input Connector
F-type IEC 169-24 Female
Frequency Range
950MHz to 2150MHz
Input Impedance
75 Ohm
Signal Level
-25 to - 65 dBm
LNB Power & Polarization Ve14V, Hori18V (600mA Max. with Overload Protection)
LNB Control
22KHz … 4 KHz, Tone burst A/B and DiSEqC 1.2
22 KHz Tone Amplitude
0.6Vpp (…0.2V)
Input Symbol Rate
1~45 Msps
FEC Decoder
Auto, 1/2, 2/3, 3/4, 5/6, 7/8
SPECIFICATIONS
Play:
Select Play and press OK once, the cursor will highlight a recorded
event. Select the event and press OK.
Delete:
Select Delete and press OK once, the cursor will highlight a
recorded event. Select the event and press OK. After deleting press EXIT.
Then store the settings.
Rename:
Select Rename and press OK once, the cursor will highlight a
recorded event. Select the event and press OK a keypad will appear.
Select character and press OK. After naming press EXIT. Then store the
settings.
.
PVR:
To enter PVR play, edit and formatting menus.
PLAY:
To commence playback
PAUSE:
To momentarily stop.
F.BAC:
To fast play backwards. Press repeatedly to increment the speed.
BAC:
To slow play backwards. Press repeatedly to increment the speed.
FOR:
To slow play forwards. Press repeatedly to increment the speed.
F.FOR:
To fast play forwards. Press repeatedly to increment the speed
REC:
To start recording.
