Manhattan 525473 Скачать руководство пользователя страница 39

Страница: 39 / 40

COMPLIANCE STATEMENTS

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of Federal Communications Commission (FCC)

Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from the receiver.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled

environment. To avoid the possibility of exceeding FCC radio frequency exposure

limits, human proximity to the antenna shall not be less than 20 cm (8 inches)

during normal operation. The antenna(s) used for this transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter. The

equipment version marketed in the U.S. is restricted to usage of channels 1-11.

CE / R&TTE

This device complies with the requirements of R&TTE Directive 1999/5/EC.

The ETSI version of this device is intended for home and office use in Austria,

Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg,

the Netherlands, Portugal, Spain, Sweden and the United Kingdom, and is also

authorized for use in EFTA member states Iceland, Liechtenstein, Norway and

Switzerland.

Содержание 525473








































Результаты поиска

Содержание 525473

Отзывы:

Похожие инструкции для 525473

Бренды по названию

Популярные бренды

Manhattan 525473, Руководство пользователя

Результаты поиска

Содержание 525473

Отзывы:

Похожие инструкции для 525473

Бренды по названию

Популярные бренды