M&R 12 COLOR, Руководство пользователя

Страница: 37 / 241

M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
The “Quartz” timer is used to select the time interval in
which the Quartz Flash unit is activated to flash cure print-
ed garments. The time interval settings are adjusted in the
same manner as described for “Index” timers described
previously. Press the “ARROW DOWN” key until the flash-
ing frame is located around the box used for the Quartz
dwell time. Now use the numerical keys to enter your selec-
tion for Quartz flash dwell time. Be aware that the “Quartz
Flash” timer allows a maximum setting of “15” seconds,
and a minimum of “0” seconds for flash dwell time. Now
press the “ENTER” key to enter your selection into the PLC
memory.
The “Pre-Heat” time interval is used to set the pre-heat
time for the Quartz heating elements. This pre-heat time is
required at the start of the production day when the Quartz
heating elements are at room (ambient) temperature. As
with the “Quartz” timer described above, the maximum
“Pre-Heat” time interval is “15” seconds, with a minimum
of “0” seconds. To pre-heat the Quartz lamps, use the
“ARROW” keys to place the flashing frame around the box
for the “Pre-Heat” indication, now press the “ENTER” key.
Quartz Flash Operation
Fig. 11
29
NOTES: