English
Mando Footloose body
HMI (Information display)
Bell
Light
Rear reflector
General battery charger
High speed battery charger
(sold separately)
Introduction
1. Tire pressure
MAX 70psi / Use a proper pump when pumping air into the tires. (The
number is based on the original tire installed to the product. Air pressure
may vary with the type of tire)
- Excessive air pressure -> Uncomfortable riding quality
- Insufficient air pressure -> May cause a flat tire, inflexible handling.
2. Battery energy check
- The remaining amount of energy in the battery can be checked on the HMI
screen.
(For more information about charging the battery, please refer to ‘F. Battery
and Charging’)
3. Brakes
- Check that front and rear brakes work properly.
(Front brake -> left lever, rear brake -> right lever)
- Practice using the brakes by gripping the brake levers gently.
(Abrupt use of the brakes may cause injuries)
4. Seat height and handle height / adjustment and locking
- Incorrect seat height and handle height may cause uncomfortable riding and
handling and reduce a rider’s coordination of the bike which may potentially
cause injuries.
(For more information about adjusting seat height and handle height, please
refer to ‘C. Adjustment of the Product’)
- When the handlepost clamp / handlepost folding lever is not fixed tightly
the steering might be affected.
(The rider may lose balance and get injured.)
5. Changing operating modes
- To understand: Practice changing operating modes before riding. (For more
information about HMI setting including switching operating modes, please
refer to ‘D. Riding Instructions’)
6. Other safety checklist
- During night riding, ensure that the front / rear reflectors are fixed, clean and
work properly for identification and safety. Additional lighting is essential in
most countries by law.
- Ensure that shoe laces are secure. (Untied shoe laces may be caught up by
a pedal or crankshaft)
- Ensure that each part of the bike is fastened properly for operation.
(Check tightness and operation of all parts including the brake cable and pedals)
Loosely fixed screws or bolts may cause injury and excessively tight screws
or bolts may affect operation and cause damage to the product.
- Ensure that the front / rear wheels are correctly aligned.
-> Bounce the front / rear wheels by lifting it up 2~3 inches off the ground.
-> Rock the front / rear wheels side to side. If any movement or wobbles
are detected, do not operate the product.
B
Items to be checked
before riding
Before every ride, it is important to carry out a safety checks to avoid any
problems
Manipulating the brake lever
HMI-battery
Handlepost clamp
Handlepost folding lever
HMI-Operatingmode
Checking the components
Before riding, check the components included in the box.
If any defect listed in the checklist is
found, please contact the store.
*A user manual and warranty are included.
*Components of this product may be changed, without prior notice, to improve the function of the product.
A-2
05
A new way of moving
Mando Footloose user manual
04
