background image

English

18 

19

A new way of moving

For the proper use of the product

How to use the

product properly                                                                                           

5. Tightening torques

G

Securing a clear view

Cautions in rainy weather:
in rainy weather, it is hard for a tire to grip the road. Also, it is hard to secure the safety of the rider 
and other car drivers due to low braking power and unclear visibility. Wet roads increase the risk of 
accidents. Ensure the product is only used  at low speeds and learn  how to stop safely on a wet road, 
by braking gently.

Suggestions for a night ride:
riding Mando Footloose at night is more dangerous than riding it during day time. Try to avoid riding at 
night or in early mornings since a rider cannot be seen by other car drivers or pedestrians. For a ride at 
night or in early mornings, use lights and wear safety accessories.

Use a light during a night ride.

Check regularly if the rear reflector  is well  attached  to the product. 

Do not remove the rear reflector. It is necessary for safety. Without the rear reflector, an accident may
be caused because a rider cannot be seen by car drivers or pedestrians. If you collide with a car, you
may be critically injured and even die. For a night ride, keep the following suggestions in mind:

- Wear a helmet that has reflective stripes on it. Attach a safety light to your body and Mando Footloose. 
- Install a brightly colored light so you can easily be seen by car drivers or pedestrians.
- Ensure that the light and  reflector is not blocked by any object. 
- Ensure that the rear reflecting plate is installed properly. 
- Ride  at a slow speed for your safety. 
- Avoid riding in a dark area or crowded place. 
- Avoid riding off road  or on uneven roads.
- Ride on a familiar routes and protect yourself with defensive riding.

Replacement of parts, installation of accessories: 
There are many kinds of parts and accessories that can improve the riding quality, performance and 
design. However, you should be cautious when you replace parts or install accessories. 
The safety is not ensured when parts are replaced and accessories are installed to Mando Footloose 
because the manufacturer of Mando Footloose has  not tested the compatibility between 
Mando Footloose and these parts / accessories. Before installing any part, accessory or tire on
Mando Footloose, contact the store to check the compatibility. Read the manual of the part / accessory 
to check the compatibility between Mando Footloose and the part / accessory. 

It the parts / accessories are not compatible with Mando Footloose, do not install it. In appropriate use
of parts / accessories may cause a critical injury .

For replacement of parts, for safety and warranty service it is recommended to use the genuine parts. 
Contact the store before replacing any part / accessory. 

For the proper use of the product

How to use the

product properly                                                                                           

4. Safety Tips for Riding

1) Follow the road regulations and traffic rules in the local area.
2) Assume that others cannot see you during a ride. 
3) Mind the cars that are moving slowly, turning and following, opening of 

doors of parked cars, children and pets on the road. 

4) Secure a clear view and mind obstacles on the road such as a construction 

site, railroad or uneven road. 

5) Before passing an intersection, stop temporarily at the intersection and look 

at both directions. 

6) Always follow the traffic regulations when turning or crossing a street.
7) Do not wear earphones during a ride.
8) Do not carry someone on your back during a ride. Do not link the product 

with a towing device such as a trailer. 

9) Do not install any equipment that may block the view or interrupt the 

operation of Mando Footloose. 

10) Do not obstruct pedestrians or cause fear by jumping out, driving danger-

ously or swerving  intentionally.

11) Do not ride Mando Footloose after drinking alcohol.
12) Avoid riding Mando Footloose in bad weather. 
13) Do not press the throttle lever while rolling Mando Footloose. 
14) This product is designed to be operated on paved road. It is not 
      appropriate for riding on uneven roads, off road, racing, jumping or stunts. 

Inappropriate use may damage the frame.

15) If too much pedaling speed is used (over 90 rpm)  the internal circuit 

protection may be over riden. 

16) For braking, always use the right brake (rear brake) first and then the left 

brake (front brake).

17) Depending on the repeated use of the brakes, the disk brakes may pro-

duce a noise. When it produces a noise, contact the store to adjust the 
gap between the brakes. 

18) Ensure that the folding lever is completely locked after unfolding Mando 

Footloose. If the folding lever is not completely fixed, it may cause a 
problem during the ride.

19) Do not operate the motor while braking.
20) Do not hit the HMI or detach it from the product while riding. 
21) Do not turn the power off while riding.
22) Do not turn the power on while throttling. 
23) If the distance going up a hill is too short, the gear may not shift to the
      ‘hill mode (the first gear)’ during a ride under the automatic transmission mode.
24) If the frame of Mando Footloose is deformed, the automatic transmission 

mode may not operate properly.

25) If Mando Footloose is hit by something during a ride, the automatic trans-

mission mode may not operate properly. 

26) After shifting to ‘hill mode’ (the first gear), the riding speed is limited
      (low-speed and high-torque mode).
27) When riding up a hill at a low speed, the automatic transmission may not 

operate properly. 

28) Do not operate the product if it was disassembled and rebuilt by the user. 

G

Mando Footloose user manual

Bolts or nuts which have been tightened using the incorrect torque:
- may come loose if the torque is too low
-  may be overstretched if the torque is too high and consequently break off
A torque that is too high may also damage the components. There is a rish of an accident.
Always tighten the bolts and nuts to the specified torque. If you do not own a torque wrench, have this 
work carried out at a qualified specialist workshop.

Parts

Tightening torque

Handlebar clamp

8Nm

Handle grib

3Nm

Handle post

6Nm

Saddle

6Nm

Содержание Footloose















Отзывы: