background image

English

How to fold/ tips for folding

Mando Footloose is designed to be foldable so the volume of the product can 
be  reduced  to  allow  easier  storage  and  transport.  Folding  can  be  done  by 
operating the folding lever located in the center. 

1. How to fold Mando Footloose

1) Ensure that the power is off.

2) It is recommended to stand on the left 

side of Mando Footloose with the front 
wheel heading forward. 

10 

11

A new way of moving

Folding instructions                                                                                                      

E

F-1

F-2

3) To fold the handlepost, loosen the 

handlepost clamp folding lever and lift 
the whole clamp upward. 

4) When the handlepost  clamp is lifted, 

the whole handlepost can be  folded 
backward to its left side.

5) Check that the right pedal is forward the 

cranks horizontal (incorrectly aligned 
pedals may damage the frame).

7) Hold the position of rear wheel with 

your right foot against the tire so Mando 
Footloose does not move during folding, 
fold Mando Footloose by lifting the seat 
or centre frame up. 

8) Hold the seat or frame with your left 

hand and push down the folding lever to 
the ‘fixed position’ with your right hand. 

9) Use the handlebar alignment grip to lock 

the steering with the wheels parallel.

OFF

6)  Unlock the folding lever located in the 

center frame by pulling it up (hold the 
upper part of the front frame with your 
left hand and lift the folding lever with 
your right hand).

2. Unfolding Mando Footloose: 

Reverse the steps above. 

3. Tips for folding / unfolding

1. Ensure that the power is off before folding / unfolding.
2. Do not turn the power on during folding.
3. After unfolding, lock the folding lever so it is closed properly. If the folding lever is not fixed completely, it may cause 

a problem during a ride. 

Battery and charging                                                                                                    

About maintaining the battery

The battery is located inside the rear frame. 

① 

Do not leave the product in hot 
areas such as inside a car or beside 
a heater. 

- If it is stored in hot areas,
  the capacity of the battery may be 

reduced which may shorten the 
range, and an internal safety switch 
may be activated to disable the

  battery for a time.

② 

Before storing the product for a 
long period of time, ensure that the 
battery is fully charged to ensure a 
longer battery lifetime.

③ 

Do not operate the product at a 
temperature below- 10°C. 

- It may reduce the lifetime of the 

battery.

④ 

Do not operate the product at a 
temperature higher than 40°C.

- It may reduce the lifetime of the 

battery.

About replacing the battery

If battery replacement is required (battery replacement is a paid service). 

The replacement schedule varies with the operating environment, temperature 

or charging habits. However, the battery has to be replaced if the range per 

battery charge becomes too short, the battery does not recover and the 

performance of the product deteriorates.

(In the winter, the range per battery charge reduces due to low temperatures.

It recovers as the temperature goes up, so battery replacement is not 

required). 

① 

 If you find any unusual circumstance 
such as a smell or deformation of 
the frame around the battery, stop 
operating the product.

- If the product is operated under such 

conditions, it may generate heat, 
cause a rupture or a fire. If you find 
any such problems, do not operate 
the product and contact the store.

② 

Do not disassemble the product. 
Do not deform or disassemble the 
battery.  

- It may generate heat, cause a 

rupture or a fire.

③ 

Do not store the product with a com-
pletely discharged battery for a long 
period of time (over 3 months).

- This may be the cause deterioration 

of the battery. 

Mando Footloose user manual

Содержание Footloose















Отзывы: