16
2. Fasten the hinges onto the radiant tube at precise spacing and according to type of the infrared
heater and relevant installation drawing (Figure 5, 6, 7). Place the hinge with plate at the beginning
and end of the radiant tube!
3. Attach the reflector to the hinge. Check the dimensions according to Figure 1 to 4. Insulated reflector
holders mounted on the hinge- see Fig. 31, 32, 34, 35.
1
1 Radiant tube black
3 Hinge U type 5
2 Clamp
4 Arch 102/180
4
3
2
1 Radiant tube black
3 Hinge U type 5
5 Tube INOX
2 Clamp
4 Arch 102/180
6 Radiant tube black - 2 sockets
1
4
3
2
2
5
6
3
2
4
1
2
1 Tube INOX
3 Radiant tube black - 2 sockets
2 Clamp
4 Radiant tube black 3290 mm
1. Insert the tube into the throat so that the holes in the tube and in the throat overlap.
2. Insert a tenon into the hole and secure the bowl buckle and strap.
3. Tighten the nuts of the strap to 20 nm.
Содержание HELIOS
Страница 1: ......
