36
MP48-R | 1.00.00
www.mc-techgroup.com
TROUBLE SHOOTING IS NOT SUCCESFUL
If you are unable to determine any of the specified causes, send the pump to M&C customer service
(contact information: see
www.mc-techgroup.com
).
Note
Flush the pump to free the pump head of dangerous or aggressive
gases (see chapter 16.2).
1. Remove the pump.
2. Clean the pump (see chapter 16.2).
3. Send the pump, together with completed RMA Service Receipt to M&C stating the nature of the
transferred medium.
18 Returns
If you send your diaphragm pump to M&C Customer Service for repair, then we require a fully completed
RMA Service Receipt. You can find the RMA Service Receipt on our website
www.mc-techgroup.com
under Service & Support
Returns.
There you enter information about the pumped medium, especially about aggressive pumped media.
If hazardous or highly aggressive gases have been pumped with the pump, the pump must be cleaned
before shipment.
19
Proper disposal of the device
At the end of the life cycle of our products, it is important to take care of the appropriate disposal of
obsolete electrical and non-electrical devices. To help protect our environment, please follow the rules
and regulations of your country regarding recycling and waste management.
