Ref.: WB-VL-SM Ver.1 3.doc
25
Move the Distance/Diameter measuring rod & touch the inner plane profile of the Rim
properly and hold it for few seconds until Audio indication and then move the
Distance/Diameter measuring rod to its home position. System will go to next screen.
Fig. 46
Move the Width measuring rod and touch the outer plane (profile) of the Rim properly
and hold it for few seconds until Audio indication. User will be prompted to save the
values as shown below:
Fig. 47
Press
key to save the Width calibration values. Then move the Width measuring
rod to its home position. Mount a Wheel & ensure the Rim Distance & Width measured
in
RIM PARAMETERS
screen are as per the Wheel Width specifications within
tolerance limit of ±0.3”.
4.4.
WHEEL TRACKING TEST
1.
Once Wheel tracking test is selected, rotate the Wheel mounting shaft clockwise
manually and ensure that the count increments from 0 to 399 (0 to 255 for SR
Models) in steps of 1 and number of revolutions (Index count) also increments
accordingly:
Fig. 48
2.
Ensure any of the count/revolutions is not missing or jumping.
3.
Press
key to return to
OPTIONS
.
Содержание LX WB-VL-65 DSP
