MANATEC LX WB-VL-65 DSP, Руководство по обслуживанию

Страница: 18 / 61

Ref.: WB-VL-SM Ver.1 3.doc
15
4. OPTIONS
This feature is protected with service password and should be used only by authorised
Service personnel
Program related options can be accessed by using the Navigation keys to select button in
the WELCOME screen followed by pressing key. System will prompt to enter the Password.
Use keys as password. Following OPTIONS screen will be
displayed:
Fig. 23
4.1. WEIGHT CALIBRATION
When calibration has to be done?

If balancing requires more than one balancing run or repeated weights for smaller
wheels.

If the Balancer is shifted from one place to other.

If foundation is affected.

If MCD shaft is disturbed.

If abnormal weights are displayed.

If Inner & Outer unbalance weights for empty shaft Wheel run are not zero.
Pre-calibration check
1. Ensure the foundation is proper.
2. Ensure the Cabinet is free from shake.
3. Check the Belt tension and RPM. The RPM should be 175 (+20/-5).
4.1.1. LCV MODELS
Pre calibration (Applicable for Factory & Authorized Engineer)
Following options will be provided in WEIGHT CALIBRATION screen:
Once selected, following sub options will be provided in WEIGHT
CALIBRATION screen as shown below:
Fig. 24
Low Point & High point calibration is password protected
Password:
This feature should be used only by authorised Service personnel
Balancing operation should be carried out only after performing 2 Point
calibration
Now press key to toggle the keypad
control from Task bar to the options available
in
OPTIONS screen.
Use navigation keys to select the required
options & press key to perform the
program related options.
Press key to go back to previous screen
or select button and press key to exit
from OPTIONS screen.