MANATEC LX WB-VL-65 DSP, Руководство по эксплуатации

Страница: 28 / 48

Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
25
Rim width measurement (Applicable only for Dynamic balancing)
Width window will be highlighted. Then
enter the Rim width by following any one of
the methods given below:

Use Width caliper provided with
equipment to measure the Width of
Rim & set the width value using
Navigation keys.

Rotate the wheel manually and hold
the wheel when the desired distance
value is displayed.
Fig. 22
If Auto width measurement is enabled, move the Width measuring rod &
touch the outer surface of Rim as shown (Refer Fig.22) and keep it in the
same position for atleast 3 seconds. Rim width will be updated in the window,
followed by an Audio indication.
Rim selection
The selected Rim type will be displayed in the Status bar of RIM
PARAMETERS screen
Wheel Rim types:
Steel rims
– Clip-on weights for both Inner and Outer
planes
Sticker weights on both Inner and Outer planes for
rims with central rib in between the planes
Sticker weights (both) on Inner plane
Clip-on weight on Inner plane and one Sticker weight
on Inner plane (towards outer side)
Clip-on weight on Inner plane and Sticker weight on
Outer plane
Sticker weight on Inner plane and clip-on weight on
Outer plane
Press / keys to move between the Rim parameter and Rim selection
keys. Use Up/Down keys to select the required Rim type and then press
key. User can also rotate the wheel to select the required Rim type and hold in
its position for few seconds the system will go back to previous screen.
STEEL
¾" ¾"
¾"
½"
½"
¾"
¾"