MANATEC LX WB-VL-65 DSP, Руководство по эксплуатации

Страница: 6 / 48

Ref.: WB-VL-65 DSP LX Premium - OM Ver.1.6 (B2927)
3
2.3. SAFETY INSTRUCTIONS FOR OPERATION
1. Read the Operating manual thoroughly.
2. Only permit qualified personnel to operate, maintain or service the Balancer.
3. Always keep the Balancer and the surrounding work area clean and free of
Tools, Parts, Debris, Grease etc.
4. Do not operate, if the equipment has been dropped or damaged until it has been
examined by qualified service personnel.
5. Do not operate the equipment with damaged Power cord.
6. Always unplug the equipment from electrical outlet when not in use. Do not pull
on the cable, always pull the plug directly out of the socket.
7. Avoid dropping of wheels heavily on the shaft while mounting and removing,
which may affect the accuracy of the equipment and also damage the shaft
threaded area.
8. The wheels must be mounted properly on the shaft, as the quality of balancing is
directly depended on the mounting of the wheels. The Quick Change Lock Nut
(QCLN) must be firmly tightened before spinning the wheel.
9. Do not hammer or hit any part of the equipment with Weight plier, Tools etc.
10. Do not lift the Wheel guard until the wheel rotation is completely stopped.
11. Never overload the Balancer.
12. Do not keep heavy objects over the system, except limited quantity of Wheel
balancing weights.
13. Keep hair, loose clothing, fingers, and all parts of body away from rotating /
moving parts.
14. Always wear Safety glasses and Gloves while operating the equipment.
15. DO NOT apply the Mechanical brake while the Motor is running. It should be
used only for adding weights or mounting/removing wheels.
16. Always comply with the applicable accident prevention regulations.
2.4. SAFETY INSTRUCTIONS FOR SERVICING
1. Inspect the Wheel balancer on daily basis.
2. Only authorized personnel are allowed to service the Balancer.
3. Turn OFF the switch and unplug the Balancer before doing any maintenance or
repair work.
4. Only certified electricians are allowed to service the electrical & electronic parts of
the equipment.
5. Do not remove / disable / override any safety device / interlocks.
6. The use of cleaning agents which attack coating or sealing materials could result
in equipment damage.
7. Ensure the disposal of ecologically harmful substances in accordance with the
appropriate regulations.
8. Use recommended spare parts only to guarantee the reliable function and to
ensure safety of the equipment.