Mammoth COMMERCIAL II Series, Инструкция по эксплуатации

Страница: 2 / 13

Mammoth Fans COMMERCIAL II SERIES |
3
2
SAFETY PRECAUTIONS
CONGRATULATIONS ON YOUR PURCHASE PARTS LIST
Congratulations on your purchase of a Mammoth Fan. The Mammoth Fans range features world class permanent magnetic
synchronous motor (PMSM) technology and precision-led aeronautical design in mammoth proportions.
With energy efficiency, design, ultimate performance and Australian conditions in mind, Mammoth Fans have been designed as the
latest in high-volume, low-speed (HVLS) ceiling fans for large residential, commercial and industrial spaces.
Their market leading features of supreme efficiency, low noise, minimal maintenance and easy installation are backed by expert
advice and a 5-year warranty. Whether it is a public or commercial space such as a bar, restaurant, gym or hotel, Mammoth Fans
are the perfect solution for your project.
The Mammoth Fan you have purchased is a sophisticated electrical device and all care must be taken to ensure the fan is kept clean
and regularly maintained. Any issues arising from misuse or neglect are not covered by the warranty.
1. General parts
1.
Always ensure the power is turned OFF before installing, maintaining, cleaning or adjusting the fan.
2.
Must be assembled and installed by a licensed electrician.
3.
All wiring and installation of the fan must adhere to the latest local and national wiring rules such as the AS/NZS 3000:2018,
electrical installations.
4.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
5.
Children should be supervised to ensure that they do not play with the appliance.
6.
An all-pole disconnection switch must be incorporated into the fixed wiring in accordance with local wiring rules.
7.
The structure to which the fan is to be mounted must be capable of supporting 4 times the weight of the product and its own
structural loading. Check with a structural engineer if unsure.
8.
Please do not alter the structure of the install site without prior advice from a structural engineer.
9.
The fan should be mounted so that the blades are at least 3.5m above the floor.
10.
This fan is suitable for covered alfresco use.
11.
The fan must be installed with the electrical control box supplied.
12.
During installation, adjustment and cleaning ensure the blades are not bent as this will drastically impact the performance of
the fan.
13.
Please make sure the fan’s input voltage and supply voltage are the same before operating.
14.
Please do not open the electrical control box without first isolating the power as electrical shock may occur.
15.
Please do not operate the fan if you notice any damage to or noises from the fan.
16.
The control box is a sophisticated controller designed specifically for your Mammoth Fan.
No modifications to the controller are permitted and failure to follow this advice could cause injury or death.
17.
Within the electrical control box is a high-voltage storage capacitor. When you operate the fan, please wait for
3 minutes to let the voltage discharge to prevent electric shock.
18.
Ensure sufficient clearance around the fan and NO obstructions before starting up the fan. Failure to do so will cause
significant damage and will not be covered under the warranty.
19.
Do not cut power to the fan while it is in operation. Please stop the fan first and then isolate the power.
1. Top plate (top connector)
2. Extension tube
3. Fan blade
4. Driving device
5. Integral fan blade connector
6. Fan blade plug
7. Fan blade winglet
3
2
1
4
5
6
7