Mamiya M645 1000S, Инструкция по эксплуатации

Страница: 54 / 59

with the Shutter release button, by-
passing the delayed shutter release, as
often as desired
*If the delayed shutter release is in-
advertently started when the shutter is
uncocked, it will stop after partially
functioning. Then, reset the lever, ad-
vance the film, and push the activating
lever to start the delayed shutter re-
lease. If the film is advanced, at such a
time, before resetting the delayed shut-
ter release,the delayed shutter release
w i l l a u t o m a t i c a l l y c o m m e n c e o p e r a t i n g
the moment the film is fully advanced,
tripping the shutter a few moments
later.
For the same reasons outlined above,
the shutter release lock ring should
also be set to the unlocked position
before starting the delayed shutter re-
l e a s e .
*When attaching the camera to a
large, professional tripod, the camera
support may protrude beyond the front
of the camera body However, if the
camera is attached to such a tripod
with the accessory Mamiya Quick-shoe
model 2, it will be possible to cock the
delayed shutter release with the cam-
era attached to the tripod.
Interchanging the Film Crank
Removing the Crank
Attaching the Crank
1. Rotate the Film Advance Crank
until it stops.
2. Then, rotate it counterclockwise
about 20 degrees while pushing in
on the Release Lever (A), and the
crank will detatch.
1. Align the red dot (B) on the camera
body with index line (C) on the Film
Advance Crank.
2. With the red dot and the index line
in alignment, push the Film Advance
Crank onto the receptor, twist about
20 degrees clockwise while pushing in
on the Release Lever (A), and it will
lock into place.
The Film Advance Crank is inter
­
changeable with the Film Advance
Knob, which is available as an
optional accessory.
51