Mamiya M645 1000S, Инструкция по эксплуатации

Страница: 27 / 59

1. Grasp both sides of the Release Latch (37)
making sure that the Film Type Index (42) is not
upside down, and then place the Film Insert
straight into the camera body. After the Film
Insert is completely inside the camera body,
release the latch (37).
2. Press in the the edges of the Release Latch
and the Film Insert will lock into place. If the Film
Insert does not go all the way in on the right-hand
side, turn the Film Advance Crank slightly while
pushing in on the right side of the insert.
3. After insertion is completed, securely close the
Back Cover. If the Film Advance Crank moves too
much when pushing in the insert, the first frame
may be fogged.
The Memo Clip, located on the Back Cover, can hold the
box top from the roll film container,
serving
as a
reminder of the type of film loaded in the camera.
The Memo Clip also
acts
as a safety lock to prevent
the Back Cover from accidentally opening.
24