Mamas & Papas Pliko combination, Руководство пользователя

Страница: 14 / 19

Apply the brakes on the
pushchair before removing
the car seat.
Pull the lever located on the
back of the car seat upwards
and hold in the fully pulled
out position.
Lift the car seat clear of the
pushchair.
Slide the locking catches on
sides of the chassis outwards
and push the attachment
brackets down.
Never place a child in the
pushchair with the brackets
up.
– 27 –
FITTING THE PRIMO VIAGGIO CAR SEAT - CHASSIS MODE
Apply the brakes on the
chassis, see page 19.
Attach the bumper bar to the
chassis, if not fitted, see page
9.
In the corners of the seat of
the chassis are there are two
attachment brackets. Rotate
the attachment brackets
upwards as far as they will
go. The brackets will lock in a
vertical position.
Align the locking clip of the
car seat with the attachment
brackets of the pushchair.
Push the car seat down onto
the attachment brackets until
it clicks into place.
Check the car seat is firmly in
place by attempting to lift it
upwards.
Note: You may find the car
seat easier to fit if you open
one side of the bumper bar.
Always lock the bumper bar
once the seat is fitted.
– 26 –