MAM Easy Start Anti-Colic, Руководство пользователя

Страница: 33 / 36

33
• Cleaning/sterilising while assembled can damage the bottle.
• Dishwasher safe on top dishwasher rack (max. 149° F / 65° C)
but food colorings may discolor components.
• Do not use abrasive cleaning agents. Only soft bristle brushes
or soft sponges should be used. Hard scourers may scratch
the plastic.
• Sterilise using one of the following methods: steam
sterilising (electric or microwave according to manufacturer’s
instructions), boiling in water for at least 5 minutes or
immersing in a liquid sterilising solution.
• Do not leave items standing in any cleaning solution for
longer than recommended – this could negatively affect the
product function
• The bottle is made of polypropylene which is hygienic, easy
to clean and relatively soft. Avoid any heavy pressure on it, as
this could affect the function.
• Do not use pin or sharp object to enlarge feeding hole of teat.
• When first used and sometimes during use, the ventilation slit
(in the raised bubble on the underside of the teat base) can
stick together. This will prevent air from entering the bottle
during feeding and as a result, cause the teat to collapse.
Slowly brush over the bubble (ventilation) a few times with
your thumb or fingers to re-open the slit.
• Ensure valve is assembled correctly and the base of the bottle
is firmly attached prior to filling bottle with liquid (see figure 1,
2 &3).
• Do not let babies self-feed.
• Store teats and valves in a dry sealed container.
• Do not leave single bottle parts in direct sunlight or heat.
• Always use only MAM teats with the MAM bottles.
• Use only sugar free food or liquids.
• To avoid injury, do not let baby walk with bottle.
• Do not put your baby to bed with bottle. Prolonged contact with liquids may cause severe tooth decay.
• Bottle teat fits all MAM wide neck bottles and the Trainer.
HEATING INSTRUCTIONS:
• NEVER pour boiling water into the bottle.
• Place in a bottle warmer, under hot running water or in a container of heated water.
• NEVER heat or cool a sealed bottle. Remove the protective cap and teat (with screw ring) before heating,
especially before using a bottle warmer and microwave heating. Do not overheat as this may damage
the bottle.
• Take extra care when heating in the microwave.
• Stir thoroughly after heating to evenly distribute heat. Allow the standing time recommended by the
microwave manufacturer. Test the temperature before serving.
• Wrap cloth or towel around bottom of bottle and shake to absorb any excess water after warming in a
bottle warmer or boiling water.
• After warming the bottle in a bottle warmer or boiling water it is recommended to tighten the bottom of
the bottle.
• Do not place bottle in heated oven.
For your child’s safety and health
WARNING!
• Always use this product with adult supervision.
• Never use feeding teats as a soother.
4
Insert teat into top of
bottle screw ring until
you hear a ”click“.
1
Place silicone valve into
bottom ring.
3
Screw assembled base
onto bottom of bottle in
slow steady manner.
2
Press down on raised
perimeter of silicone
valve.