MAM Easy Start Anti-Colic, Руководство пользователя

Страница: 10 / 36

10
Instructions for use:
Easy Start™ Anti-Colic
Clean before first and each subsequent use.
Before first use separate all 6 parts and place them in
boiling water for 5 minutes. This is to ensure hygiene.
Inspect all individual bottle parts before each use and
pull the feeding teat in all directions. Throw away at the
first signs of damage or weakness.
To ensure proper cleaning/sterilising all bottle parts
MUST be disassembled.
Cleaning/sterilising while assembled can damage the
bottle.
Dishwasher safe on top dishwasher rack (max. 65° C /
149 F) but food colourings may discolour components.
Do not use abrasive cleaning agents. Only soft bristle
brushes or soft sponges should be used. Hard scourers
may scratch the plastic.
Sterilising using one of the following methods:
steam sterilising (electric or microwave according to
manufacturer’s instructions), boiling in water for at least 5
minutes or immersing in a liquid sterilising solution.
Do not leave items standing in any cleaning solution for
longer than recommended - this could negatively affect the
product function.
The bottle is made of polypropylene which is hygienic,
easy to clean and relatively soft. Avoid any heavy pressure
on it, as this could affect the function.
Do not use pin or sharp object to enlarge feeding hole of
teat.
When first used and sometimes during use, the ventilation slit (in the raised bubble on the
underside of the teat base) can stick together. This will prevent air from entering the bottle during
feeding and as a result, cause the teat to collapse. Slowly brush over the bubble (ventilation) a few
times with your thumb or fingers to re-open the slit.
Ensure valve is assembled correctly and the base of the bottle is firmly attached prior to filling
bottle with liquid (see figure 1, 2 &3).
Do not let babies self-feed.
Store teats and valves in a dry sealed container.
Do not leave single bottle parts in direct sunlight or heat.
Always use only MAM Teats with the MAM Bottles.
Use sugar free food or liquids only.
To avoid injury, do not let baby walk with bottle.
Do not put your baby to bed with bottle. Prolonged contact with liquids may cause severe tooth
decay.
Bottle teat fits all MAM Bottles and the .
HEATING Instructions:
NEVER pour boiling water into the bottle.
Place in a bottle warmer, under hot running water or in a container of heated water.
NEVER heat or cool a sealed bottle. Remove the protective cap and teat (with screw ring) before
heating, especially before bottle warmer and microwave heating. Do not overheat as this may
4
Insert teat into top of
bottle screw ring until
you hear a ”click“.
1
Place silicone valve into
bottom ring.
3
Screw assembled base
onto bottom of bottle in
slow steady manner.
2
Press down on raised
perimeter of silicone
valve.