MAM Easy Start Anti-Colic, Руководство пользователя

Страница: 20 / 36

20
• Do not use abrasive cleaning agents. Use only soft bristle brushes or soft sponges. Rough/hard scour-
ers can scratch the plastic.
• Sterilise using one of the following methods: steam sterilising (electric or microwave, according to the
manufacturer’s instructions), boiling in water for at least 5 minutes or immersing in a liquid sterilising
solution.
• Can be stacked after cleaning when dry.
Warming baby food (do not overheat):
• To warm baby food, we recommend placing it in a bath of hot water or a bottle warmer.
• Remove the lid of the Storage Solution before placing the cup in a bath of hot water or a bottle warmer.
• To distribute heat evenly, stir the baby food thoroughly after heating and allow time to cool.
For your child’s safety and health:
WARNING!
• Always use this product with adult supervision.
• Keep all components not in use out of the reach of children.
6. Feeding
MAM recommends the MAM Easy Start™ Anti-Colic Bottle for feeding breast milk.
6.1. Easy Start™ Anti-Colic bottle
Instructions for use:
• Clean before first and each subsequent use.
• Before first use separate all 6 parts and place them in boiling water for 5 minutes. This is to ensure
hygiene.
• Inspect all individual bottle parts before each use and pull the feeding teat in all directions. Throw away
at the first signs of damage or weakness.
• To ensure proper cleaning/sterilising all bottle parts MUST be
disassembled.
• Cleaning/sterilising while assembled can damage the bottle.
• Dishwasher safe on top dishwasher rack (max. 65° C / 149° F)
but food colourings may discolour components.
• Do not use abrasive cleaning agents. Only soft bristle brushes
or soft sponges should be used. Hard scourers may scratch
the plastic.
• Sterilise using one of the following methods: steam sterilising
(electric or microwave according to manufacturer’s instruc-
tions), boiling in water for at least 5 minutes or immersing in a
liquid sterilising solution.
• Do not leave items standing in any cleaning solution for
longer than recommended – this could negatively affect the
product function
• The bottle is made of polypropylene which is hygienic, easy
to clean and relatively soft. Avoid any heavy pressure on it, as
this could affect the function.
• Do not use pin or sharp object to enlarge feeding hole of teat.
• When first used and sometimes during use, the ventilation slit
(in the raised bubble on the underside of the teat base) can
stick together. This will prevent air from entering the bottle
during feeding and as a result, cause the teat to collapse.
Slowly brush over the bubble (ventilation) a few times with
your thumb or fingers to re-open the slit.
• Ensure valve is assembled correctly and the base of the bottle
4
Insert teat into top of
bottle screw ring until
you hear a ”click“.
1
Place silicone valve into
bottom ring.
3
Screw assembled base
onto bottom of bottle in
slow steady manner.
2
Press down on raised
perimeter of silicone
valve.