MAM Easy Start Anti-Colic, Руководство пользователя

Страница: 21 / 36

21
is firmly attached prior to filling bottle with liquid (see figure 1, 2 &3).
• Do not let babies self-feed.
• Store teats and valves in a dry sealed container.
• Do not leave single bottle parts in direct sunlight or heat.
• Always use only MAM teats with the MAM bottles.
• Use only sugar free food or liquids.
• To avoid injury, do not let baby walk with bottle.
• Do not put your baby to bed with bottle. Prolonged contact with liquids may cause severe tooth decay.
• Bottle teat fits all MAM wide neck bottles and the Trainer.
HEATING INSTRUCTIONS:
• NEVER pour boiling water into the bottle.
• Place in a bottle warmer, under hot running water or in a container of heated water.
• NEVER heat or cool a sealed bottle. Remove the protective cap and teat (with screw ring) before heating,
especially before using a bottle warmer and microwave heating. Do not overheat as this may damage
the bottle.
• Take extra care when heating in the microwave.
• Stir thoroughly after heating to evenly distribute heat. Allow the standing time recommended by the
microwave manufacturer. Test the temperature before serving.
• Wrap cloth or towel around bottom of bottle and shake to absorb any excess water after warming in a
bottle warmer or boiling water.
• After warming the bottle in a bottle warmer or boiling water it is recommended to tighten the bottom of
the bottle.
• Do not place bottle in heated oven.
For your child’s safety and health:
WARNING!
• Always use this product with adult supervision.
• Never use feeding teats as a soother.
• Continuous and prolonged sucking of fluids will cause tooth decay.
• Always check food temperature before feeding.
• Keep all components not in use out of the reach of children.
Self-sterilising function of Easy Start:
The self-sterilising function of the Easy Start is proven to be effective for killing common household germs
and bacteria. This method is completely sufficient and safe. For the best results, please follow all instruc-
tions carefully and use only as directed.
This practical and time-saving function can be achieved in 3
simple steps. Always thoroughly clean individual bottle parts
before beginning this process!
Step 1:
Assemble clean bottle parts as follows: base with sili-
cone valve, teat with screw ring, bottle body and protective cap.
Step 2:
Fill the base with silicone valve with 20 ml of cool water.
The protective cap makes a practical measuring cup.
Step 3:
• Place the screw ring with teat in the bottle base.
• Place the bottle body on it (optionally screw in slightly to avoid
pouring out hot water by removing the bottle from microwave).
• Place the protective cap on top.