manualshive.com logo in svg

Malossi 3114443, Руководство пользователя

Поделиться
Скачать
Malossi 3114443 Скачать руководство пользователя страница 35

- 35 -

Quest’ultima curva viene selezionata ruotando il commutatore in qualunque posizione diversa da MAPS 1 o MAPS 2. Questa curva è consigliata 
qualora si voglia modifi care il fl usso di carburante solo regolando il potenziometro, senza ulteriori regolazioni.

La centralina Malossi viene così fornita: curva 1 e potenziometri a zero.

Oltre alle 4 curve ci sono 3 potenziometri che permettono di mettere a punto ulteriormente la curva selezionata. Questi potenziometri consentono di 
regolare la curva del carburante da +20% a –20% in 3 differenti range di RPM:
- basso : 

0 – 2.000 RPM

- medio : 

2.000 – 6.000 RPM

- alto : 

6.000 – max RPM

The fourth curve is selected by moving the rotary switch to any position other than MAPS 1 or MAPS 2. This curve is useful for those wanting to just 
modify the fuel delivery with the potentiometer adjustment, without having any other adjustments. 

The Malossi CDI is supplied with curve 1 and zeroed potentiometers.

In addition to the 4 curves, there are 3 potentiometers that allow you to fi ne tune the curve you select. These potentiometers allow you to adjust the 
fuel curve from +20% to –20% in 3 different RPM ranges:
- low: 

0 – 2,000 RPM

- mid: 

2,000 – 6,000 RPM

- high: 

6,000 – max RPM

La courbe dernière est sélectionnée en tournant le commutateur dans une position différente de MAPS 1 ou MAPS 2. Cette courbe est conseillée si 
vous voulez modifi er le fl ux d’essence seulement en réglant le potentiomètre, sans régulations ultérieures.

Le boîtier éléctronique Malossi est fourni comme ça: courbe 1 et potentiomètres mis à zéro.

En plus des 4 courbes il y a 3 potentiomètres qui permettent de régler ultérieurement la courbe selectionnée. Ces potentiomètres permettent de
régler la courbe du carburant de +20% à –20% dans 3 ranges de RPM différents:
- bas : 

0 – 2.000 RPM

- moyen : 

2.000 – 6.000 RPM

- haut : 

6.000 – max RPM

Содержание 3114443





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды