manualshive.com logo in svg

Malossi 3114443, Руководство пользователя

Поделиться
Скачать
Malossi 3114443 Скачать руководство пользователя страница 3

- 3 -

ATTENZIONE : nella confezione è inclusa la centralina FORCE MASTER 2 che permette di variare la qualità di benzina iniettata dal 

motore. La centralina deve essere necessariamente montata affi nchè il cilindro Malossi funzioni correttamente.

CARATTERISTICHE TECNICHE

Cilindro
Alesaggio Ø 63 mm; Corsa 58,6 mm; Cilindrata 182,58; Rapporto di compressione 10,6:1.
-  Materiale: lega primaria di alluminio ad alto tenore di silicio bonifi cato, canna con riporto di carburi di silicio in una matrice di nichel galvanico e 

levigatura incrociata con due passaggi di diamanti con tolleranze ristrettissime.

WARNING : the kit is equipped with FORCE MASTER 2 CDI which allows to vary the fuel delivery from the engine. The CDI must be 

necessarily assembled to grant the correct working of Malossi cylinder.

TECHNICAL FEATURES

Cylinder
Bore: Ø 63 mm; Stroke: 58.6 mm; Displacement: 182.58 cc; Compression ratio: 10.6:1.
-  Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel 

die and crossed smoothing with two diamond passages with very limited tolerances.

ATTENTION : dans le kit nous fournissons le boîtier éléctronique FORCE MASTER 2 qui permet de changer la quantité d’essence 

injectée par le moteur.  Le boîtier éléctronique doit être nécessairement monté pour le correct fonctionnement du cylindre Malossi.

CARACTERISTIQUES TECHNIQUES

Cylindre
Alésage : Ø 63 mm; Course : 58,6 mm; Cylindrée : 182,58; Rapport de compression : 10,6:1.
-  Matière : alliage primaire d’aluminium à teneur élevée en silicium trempé et revenu, chemise du cylindre avec application de carbures de silicium dans 

une matrice en nickel galvanique et lissage croisé par deux passages de diamants, avec des tolérances très strictes

Содержание 3114443





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды