Bedpan / Urinal Bottle and Utensil / Bowl Washer Disinfector (WDS)
Operation, Maintenance and Installation Manual
Issue 16
Page
34
August 22
5.12 Manual Purge Detergent Line (Maintenance)
1.
Turn power OFF at control LCD display
2. Turn power ON
at control LCD display
3. Hold down both SCROLL and SELECT buttons, when MENU is displayed, release buttons
4. SCROLL to TEST menu and press SELECT RELAY
5. SCROLL to DETERG menu and press SELECT START press SELECT START/RUNNING
The detergent pump will run for 5 seconds, if detergent line completely purged display shows PASS; then DETERG
If display shows FAIL, check detergent level and repeat Purging of the Detergent Line
5.13 Safe Access to the Load or Chamber in Fault Condition
1.
Turn power OFF at control LCD display
2. Turn power ON at control LCD display
3. Hold down both SCROLL and SELECT buttons, when MENU is displayed, release buttons
4. SCROLL to TEST menu and press SELECT RELAY
5. SCROLL to DOOR OPEN and press SELECT to turn on the door opening relay (ensure hands are clear and no
obstructs or objects are in the opening path of the door)
6. Once the door is open, press SELECT
to turn off the door open relay
7. To close the door, press SCROLL to DOOR CLOSE and SELECT to turn on the door closing relay (ensure hands
are clear and no obstructs or objects are in the opening path of the door)
6. Once the door is closed, press SELECT
to turn off the DOOR CLOSE relay
Treat all items in the load/chamber as unprocessed, do not use until they can be cleaned or processed accordingly.
To EXIT Service Menu:
1.
SCROLL to EXIT press SELECT
2. SCROLL to EXIT press SELECT
3. SCROLL to EXIT press SELECT
Once all menus have been exited the LCD screen will turn blank, once unit is powered on from
this state it will return to normal operation.
