Malmet WDF-3020, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 19 / 35

Front Loading Utensil Washer Disinfector (WDF)
Operation, Maintenance and Installation Manual
Issue 1 Page 18 20/01/2022
5.7 Making equipment safe after incomplete operating cycle
If an incomplete cycle has occurred, it is assumed that the load being processed has not been subjected to a complete
cycle as per the set process parameters. For this reason access to the load is restricted and will not be allowed until a full
cycle has been completed.
At the end of an incomplete cycle or on powering up the device after an incomplete cycle, a fault code will display relating
to the cause of the incomplete cycle (Please see section 5.3 Fault list for description of fault code). Depending on the
nature of the fault an error reset may need to be completed; this can be done by following the instructions below. If the
device does not allow an Error Reset to be completed, or the fault re-occurs after an Error Reset, it is recommended that
the device is isolated and service is arranged to correct the fault.
The following functions must only be undertaken by trained service personnel.
5.4 Error reset
1.
With the device in fault, press the both the Menu & Start Buttons simultaneously. A user login screen will appear.
2. Select User Level, Maintenance or Higher and enter 4 digit PIN.
3. Navigate to “Watch Pages” & press “Select”
4. Once in the “Watch Pages” menu, scroll down to “Machine Overview”
5. Once in the “Machine Overview” menu, scroll down to “Err Reset”
6. Select the highlighted field, and then change from “OFF” to “ON” using the rotary dial. Press dial in to “Select”
7. Once done press the “Cancel” button to exit each menu level until back at the Home screen.
If fault has been corrected, device will display “Ready” or automatically recommence the cycle depending on the
nature of the fault. If the fault recurs please Lock Out all services to the device and arrange for service to rectify.
5.5 Master reset (access to load in a fault condition)
1.
With the device in fault, press the both the Menu & Start Buttons simultaneously. A user login screen will appear.
2. Select User Level, Maintenance or Higher and enter 4 digit PIN.
3. Navigate to “Watch Pages” & press “Select”
4. Once in the “Watch Pages” menu, scroll down to “Machine Overview”
5. Once in the “Machine Overview” menu, scroll down to “Master Reset”
6. Select the highlighted field, and then change from “OFF” to “ON” using the rotary dial. Press dial in to “Select”
7. Once done, while still in the “Machine Overview” menu. Scroll to “Err Reset” and select the highlighted field, then
change from “OFF” to “ON” using the rotary dial. Press dial in to “Select”
8. Once completed, press the “Cancel” button to exit each menu level until back at the Home screen.
9. Device should now be idle with the door unlocked.
Caution: When performing a Master reset to access the load, items are to be treated as unprocessed as they have
not been subjected to a complete cycle.