17
1
5
4
2
6
3
7
1
2
3
4
5
When you assemble products, please do not plug into electricity. Loosen the locking
hooks, pull the supplied sponge filter over the filter basket for wet vacuum cleaning, then
make the clips locking on the cover. Insert the suction hose in the hole on the side of the
tank, turn the hose connector. Then insert the plug into the socket, press the switch and
the machine begins to work. After working or when the bin is full, what significantly de-
creases the suction power, remove the plug from the electrical outlet and clean the drum.
To do this, unhook the two locks and remove the suction unit and filter.
Dry vacuum-cleaning with HEPA filter
Dry vacuum-cleaning with non-woven bag
1. When you assemble products, please do not plug into electricity.
2. Loosen the locking hooks, pull the supplied non-woven bag on the suction mouth
for dry vacuum cleaning.
3. Then make the clips locking on the cover.
4. Insert the plug into the socket.
5. Press the switch and the machine begins to work.
6. After use or when the tank is full (which significantly decreases the suction power)
remove the plug from the electrical outlet and clean the tank.
Synchronization function
1. Push the switch to “II”.
2. Insert the power supply plug of the vacuum cleaner into the socket.
3. Connect the other machines to the socket of the vacuum cleaner.
4. Connect the suction tube to the dust out facility on the power tools or appliance.
5. Once open the switch of the other machines, they will be synchronization work.
Important:
•
Only connect power tools or appliances with a max power rating of 2000W.
•
Only use this function for dry vacuum cleaning, never for wet vacuum cleaning.
