1. Installation instructions
1.1. Installation conditions
All the infrared sensors must be in contact with the glass surface.
No movement of the control under the glass ceramic after installation must be assured.
1.2. Printing on glass
The glass printing area over the sensors must be centred with the sensor.
Glass printing thickness in an area of 10mm around the center of the keys <= 0.5mm.
1.3. Type of glass
Glass thickness 4mm. Glass infrared light transmission wavelength range of 925nm.
1.4. User interface initial calibration
The User Interface has implemented an initial keyboard calibration focused to adapt the sensibility of the keys, to the
final mechanical, environmental and user conditions.
Any time the Cooktop is plugged or there is a power failure that generates a reset in the user interface, the first time the
Key Lock
is touched the sensitivity of the keyboard is readjusted. This first touch of the
Key Lock
must be done in certain
conditions:
Do not use gloves
Use a clean finger.
Touch the glass (smooth touching).
5
Installation
Instructions
Содержание MH-03I N
Страница 1: ...Operating and Installation Instructions Induction hobs MH 03I N H ng D n S D ng...
Страница 2: ......