Malloca MH-03I N, Инструкции по эксплуатации и монтажу

Страница: 9 / 41

4.1. Selecting a heater
A heater is selected by touching the heater [HEATER_SELECTION] key for 500 ms, a beep sounds and the heater
display shows the power level with normal brighness. The heaters that are not selected are dimmed.
Fig. 5.: Heater selection
The [HEATER_SELECTION] key will be locked to select a heater:
o
If the cooktop is off (all the heater displays off), or
o
if the key lock is activated (KEYLOCK LED on), or
o
if there is any heater or appliance error.
If more than one heater is on, the heater selection will finish 10 second after the last touch of the [-], [+] key or if
another heater is selected. If only one heater is on, the heater selection will finish if another heater is selected.
When the heater selection is finished after 10 seconds, a beep sound and all the heater displays that were dimed show
the power levels with normal brightness.
Fig. 6.: Selected cookset 3. Heater selection finished
When the heater selection finishes, if the selected cookset is 0, the heater display will be switched off.
9
4. Switching On a Heater
To switch on a heater it is necessary to actuate every cooking zone by means of two operations:

Select a heater

Select the desired cookset
Switching On a Heater