Malloca MH-03I N, Инструкции по эксплуатации и монтажу

Страница: 17 / 41

10.2. Selecting the time.
When the timer is waiting a time selection, the timer value can be selected between 0 and 99 minutes touching the [+]
or [-] keys. The remaining time will be displayed in the opposite part of timed heater. If timed heater is in the down part, timed
time will appear in up displays and on the contrary.
If the [+] or [-] key is touched continuously the change speed is increased automatically. This makes possible to reach
the desired time setting more quickly.
Fig. 23.: Selecting the remaining time for a heater.
If the time is not selected before 10 seconds, or if the selected time is 0 after 10 seconds the last touch over the [+] or
the [-] key, the timer is switched off.
Fig. 24.: Timer switched off if the selected remaining time is 0.
10.3. Starting Timer countdown.
The countdown starts when the timer visualization is finished touching any [HEATER_SELECTION] key or
automatically 10 seconds after the last touch over the [+] or [-] keys. A beep sounds and the heater display will show the power
level and the dot point showing that the heater is timed.
Fig. 25.: Timed heater
17
Operating the timer