Malibu Boats Boat 2014, Руководство пользователя

Страница: 111 / 164

2-87
Hot Water Shower
If your boat is equipped with a hot water shower, you will find an ON/OFF accessory
switch located in the rear storage area. You will find the valves located on the starboard
side of the motorbox compartment. The shower head can be found in the port gunnel
sides. You should find specific instructions on the use of your hot water shower in the
packet of materials you received with your boat.
Figure 2-48. Shower Head Figure 2-49. Shower Valve
Pull-Up Cleats
Pull-Up cleats are available for all boat models. These
cleats will sit flush on the side of the boat deck when
depressed. To use the cleats, simply pull them up. Push the
cleats down to stow them.
Docking Lights
The docking lights should only be used during slow speed docking maneuvers. The lights
are activated by a switch on the accessory switch panel and have a 10 amp circuit
breaker. The docking lights use LED bulbs which cannot be replaced.
Illusion G3
The Illusion G3 has a solid foundation of billet aluminum
bases and billet tower support wings backing the 3"
stainless steel hoop. The Illusion G3 features dual gas
spring shocks to assist in creating the feature of weightless
fold-down. It uses two bolts under the top frame rail of the
tower base to fasten the tower in the UP position. These
need to be periodically checked for tightness. The Illusion
G3 is standard on Wakesetters and Ride Series models, and
optional on TXi.
Due to vibration and rough water conditions it is possible
for bolts to loosen. Before each use, inspect all mounting
bolts (Tower, Wakeboard Racks, Lights, Speakers, etc.) to
ensure they are tight. See your local dealer for any
questions and/or assistance. Failure to do so can cause
serious damage and/or injury to the boat and/or passengers.
Figure 2-50. Pull-Up Cleat
Figure 2-51. Optional G3
Tower Knob