Malibu Boats Boat 2014, Руководство пользователя

Страница: 136 / 164

4-2
It is important to keep your vinyl clean at all times. Some substances can stain the vinyl if
you leave them on for even a short period. Remove any contaminant and clean the area
immediately. Some household cleaners, powdered abrasives, steel wool, industrial cleaners,
dry cleaning fluids and lacquer solvents can damage and discolor. Failure to care for your
vinyl properly, or use of improper cleaners may damage the vinyl and void your warranty.
DO NOT use products such as acetone, ArmorAll
®
, bleach, baking soda, Fantastik
®
,
Formula 409
®
, gasoline, kerosene, Murphy
®
Oil Soap, Simple Green
®
, Son of a Gun!
®
or
any silicone based protectants. DO NOT clean your vinyl with power washers, as they can
generate pressures up to 3,500 psi and could damage the surface of your interior.
Common stains and steps to treat:
Type of Stain Step #1 Step #2 Step #3
General care A B
Dirt buildup A B
Ballpoint ink* B A
Chewing gum B A
Coffee, tea, chocolate B A
Grease C B A
Household soil A B
Ketchup A B
Latex paint A B
Lipstick C A B
Mildew or wet leaves* B A
Motor oil C B A
Oil-based paint C B A
Permanent marker* B A
Spray paint B A
Suntan lotion* A B
Tar/asphalt C B A
Yellow mustard A B
A. Medium-soft brush, warm, soapy water, rinse/dry
B. 303 Fabric and Vinyl Cleaner
®
, rinse/dry
C. Wipe or scrape off excess (chill gum with ice)
After all cleaning methods, rinse well with clear, warm water.
* Suntan lotion, tree pollen, wet leaves and some other products, including waxes, can
contain dyes that stain permanently.
The Plexiglas walk-through windblock should only be cleaned with mild, soapy water
and a soft cloth. Ammonia-based or harsh chemical cleaners will damage the Plexiglas.