Malaguti PHANTOM MAX 125, Руководство пользователя

Страница: 119 / 252

17
EN
3) TOD FUNCTION:
• Shows the total distance covered by the
scooter
This value is never reset, even when the scooter
is no longer powered. (The total kilometres will
be stored for 10 years from the last time the
vehicle was used).
4) ENGINE RPM:
• Shows the engine rpm, with a value combined
with a graphic bar.
CAUTION! If the RPM of the motor running idle is
lower than 1200, no number will be shown on
the display. Have a Authorised Malaguti Service
Centre check the vehicle as soon as possible.
5) AMBIENT TEMPERATURE:
• Shows the ambient temperature in °C on the
display. The menu functions and speed are not
displayed.
6) BAR GRAPH FUNCTION SEARCH:
• Selects the functions from the submenu
or bar graph
When this image is displayed, you can select
one of the available functions by pressing the
MODE button within 3 seconds. If you do not
press the button within 3 seconds, the display
will show the first menu function (1) combined with the speed indication.
2.7.1 FUNCTION SELECTION AND WARNING LIGHTS
In order to make the display easier to understand, the functions are divided
into a ‘menu’ and a ‘submenu or bar graph’. The warning lights (sec.
2.7.1.1) are not selected. They appear automatically whenever necessary.
To select functions, press the
MODE button until you select the requested
one.
SPEED IS ALWAYS DISPLAYED.
N.B. You can get to the menu functions from any submenu.
MAIN MENU
1) TIME FUNCTION:
• Shows the time.
To set the desired time, hold down the MODE
button. The current time will first have 10 slow
increments and then the increment will become
rapid. While setting the time, the display will
show the segments concerning hour and
minutes. This operation shall be carried out
while the vehicle is turned off and the ignition key is in position.
2) TD FUNCTION:
• Shows the partial distance in km and
hundreds of metres.
To reset, hold down the MODE with the ignition
key in position. The meter automatically
resets when it reaches 999.9 Km, then it
restarts counting.