MAKSIWA SC.1100.X, Инструкция по эксплуатации

Страница: 15 / 52

15
4 Installation
4 Installation
4.1 Unpacking and Checking Contents
Carefully unpack the table saw and all its parts, and compare against the illustration following.
WARNING:
• To avoid injury from unexpected starting, do not plug the power cord into a power source receptacle during
unpacking and assembly. This cord must remain unplugged whenever you are assembling or adjusting the
machine.
• If any part is missing or damaged, do not plug the machine until the missing or damaged part is replaced,
and assembly is complete.
TABLE OF LOOSE PARTS
Unpack carton; check you machine to see parts listed below:
Item Parts Name Item Parts Name
1 TABLE SAW 14 SMALL RIVING KNIFE
2 EXTENSION TABLE (2) 15 HEX WRENCH (6)
3 RIP FENCE ASSEMBLY 16 10-13MM WRENCH
4 MITER GAUGE ASSEMBLY 17 24MM WRENCH
5 BLADE GUARD ASSEMBLY 18 PUSH STICK
6 HANDWHEEL WITH KNOB (2) 19 RIP FENCE STORAGE HOOKS (2)
7 LONG FRONT RAIL 20 BLADE GUARD STORAGE HOOKS (2)
8 SHORT FRONT RAIL 21 LEFT STAND “A”
9 LONG REAR RAIL 22 FRONT BRACE WITH LABEL
10 SHORT REAR RAIL 23 REAR BRACE
11 BLADE 24 RIGHT STAND “B”
12 ANTI-KICKBACK PAWL ASSEMBLY 25 AAA BATTERY (2) (THE BATTERIES ARE USED
FOR LASER. THEY WILL NOT BE SUPPLIED, IF
YOUR TABLE SAW IS NOT SUPPLIED LASER )
13 RIVING KNIFE