11
Keep the table clean after each use.
Periodically (and always with the machine off) it is
important to do all the cleaning of the machine, removing
glue residue that could affect the proper functioning of
the equipment. Clean the guides, the cutter and scraper
carefully.
MAINTENANCE SCHEDULE
Daily:
• Aspirate all dust on top and around the machine.
• Clean the guides, cutter and scraper keeping clean all
residue of glue and edge tape.
Weekly:
• Clean dust accumulation inside and around the
machine.
• Check for wear or damage to the buttons and cord.
• Check wear on the cutter and scraper bit.
TECHNICAL ASSISTENCE
WARRANTY TERM
MAKSIWA assures the owner of his equipment,
identified by the date of issue of the purchase invoice, a
warranty of one (1) year, as follows:
1. The warranty period begins on the date of the
commercial invoice.
2. Within the warranty period, the hand labor and the
components replaced by manufacturing defect will be
provided for free as long as duly proved by Maksiwa
Service.
3. Third-party manufacturing equipment that makes up
MAKSIWA equipment (such as motors, electrical
equipment, belts etc.) are subject to the terms and
conditions of warranty of their respective manufacturers.
4. In case of exchange for the warranty, please return
the defective part for the manufacturer urgently.
5. Costs and risks of transport will be by the machine
owner.
6. Equipment installation expenses and workplace
adaptations are due to the machine owner.
7. When you notice any defect or malfunction when
receiving the equipment, get in touch immediately with
the manufacturer or resale. Do not turn it on.
8. Not included in this warranty technical visits aimed at
cleaning or adjustments caused by wear, resulting from
normal use of the equipment.
9. The warranty does not cover problems caused by
mistreatment, carelessness, misuse or inappropriate use
of the functions designed for this equipment in this
manual, as well as poorly executed operations by
untrained operators to operate it.
10. MAKSIWA is not responsible for lost productivity,
direct or indirect damages caused to the owner of the
equipment or to third parties, or any other expense,
including lost profits.
11. Even under warranty, you may lose its validity as
follows:
a) Application of non-original components;
b) Alteration of its original features;
c) Lack of proper maintenance;
d) Improper use of the equipment;
e) Change in equipment or electronic connections;
f) Damage caused by mechanical shock or exposure to
unsuitable conditions (humidity, salt spray, corrosive
agents, etc.);
g) Damage caused by bad weather (floods, flooding,
lightning, power outages etc.).
For your safety, trust the repairs, maintenance and
adjustments (including inspection and replacement) for
technical assistance recommended by MAKSIWA,
always use genuine spare parts and accessories,
reassembling to its original Edge Trimmer the same
way.
Manufactured by:
Maksiwa Industria e Comercio de Maquinas LTDA.
St. Nelson Argenta, 436
Colombo
– Parana – Brazil
Zipcode: 83.402-220
CNPJ: 76.670.215/0001-81
www.maksiwa.com
