15
the ribbon at the desired angle with the aid of the scale (B). For hold in the chosen position, retighten
the nut hexagonal (A). See the following figure. If you wish reposition the tape file perfectly in the
direction horizontal, lower the tape assembly completely until touch the stop that is located under
the assembly part mentioned.
4.3 Adjusting the Angle Guide
The Angle Guide (A) is used to hold and support the workpiece at the desired angle during operation.
To adjust the guide, simply release the handle (B) and position it at the desired angle. After that,
retighten the knob (B) to lock the angle. Make sure the angle is correct by taking for assistance a
template. If necessary, adjust the pointer of the scale. Follow the next figure.
