MAKOT MCH-07 v. 2, Руководство пользователя

Страница: 18 / 26

Strona 18 z 26
4.3.1. Table of settings for the washing segment.
DESCRIPTION OF THE
FUNCTION
SYMBOL RANGE OF SETTING
FACTORY
SETTING
entry in the settings U000 access code 121
editing the programs EdPr
the ability to edit factory programs
and create your own programs –
see section 4.3.2. Programming
for the washing segment
8 programs –
see section 4.3.3.
Factory programs
for washing
segment
setting the number of program
to be executed by the
controller
dPro
Pro1, Pro2, Pro3, Pro4, Pro 5,
Pro6, Pro7, Pro8
Pro1
setting the manual activation of
the vacuum pump or the stirrer
UPP
0 – off
1 – manual activation of the
vacuum pump
2 – manual activation of the stirrer
0
test mode UEL
0 – off
1 – on; controller works in the test
mode
0
setting the heating option
[only MCH-07T v.2 version]
OHA
0 – off
1 – heating with active maximum
time
2 – heating without active
maximum time
2
setting the maximum loss
of
power time, after which
the controller will return to the
interrupted operation
UAP
0 – off; resuming operation is not
time-limited
1 – the possibility of setting the
time from 1 h to 9 h; if the break is
longer, the controller will not
resume its operation
9 (h)
return to the factory settings
powrót do ustawień
fabrycznych przy następnym
uruchomieniu sterownika
Pd0d
0 – off
1 – on; return to the factory
settings, next time the controller is
started
0
exit from the settings EE
4.3.2. Programming for the washing segment.
The controller is protected against accidental entry into the service settings mode,
assuming only those available to the installer or service technician. These safeguards
include:

the necessity o press and hold the S button (enter settings) for approx. 15 sec.,

the necessity to enter the access code (see section 4.3.1. Table of settings for the
washing segment),

entering the access code in a few steps.
ATTENTION
Please do not share the access code with the direct users.