Strona
13
z
26
3.6. Description of the cooling segment operation.
When the controller is connected to the main, the display shows the currently measured
temperature. In addition to displaying the temperature value, the controller does not
control any external elements.
Pressing the button
causes the cooling control operation to start. This status is
indicated by diode placed above the display (blue). Depending on the programming
of the controller, this signaling is intermittently flashing (pre-cooling) or continuous.
The work of the unit is signaled by the diode located above the button. The unit then
works in an automatic cycle according to the settings made. The operation of the stirrer
is indicated by the diode located above the button
.
Pressing the button
causes manual operation of the stirrer, which is indicated by the
intermittent lighting of the diode located above this button.
Manual operation of the stirrer is possible in the following cases:
if cooling is switched on and the stirrer is not working,
if cooling is switched off,
if the washing process is on.
During the manual release of the stirrer, pressing the button
again switches off the
manual working mode.
It is recommended to change the control temperature after switching off the cooling
process.
The temperature values saved can be read both when the cooling process is switched on
and off.
