Makita PM7650H, Инструкция по эксплуатации

Страница: 14 / 112

14
OPERATION
Starting 1.
WARNING:
Never attempt engine start in a place where the unit was refueled. When •
starting the engine, keep a distance of at least 3 m (10 feet).
Otherwise, it will may cause ignition or fire. –
Exhaust gas from the engine is toxic. Do not operate the engine in a poorly- •
ventilated place, such as in a tunnel, building, etc.
Operating the engine in the poorly-ventilated place may cause poisoning by –
exhaust gas.
In case of detection of any abnormality in sound, odor, vibration after start, •
stop the engine immediately and carry out inspection.
If the engine is operated without attending such abnormality, an accident –
may occur.
Make sure that the engine stops when the stop switch is set to “O” position. •
When the engine is cold, or when the fuel it refueled 1)
Set this machine on a flat space. (1)
Set the stop switch to “ I ” position. (2)
Verify that the cruise control lever is in the low-speed position. (3)
Continue to push the primer pump until fuel enters into the primer pump. (4)
In general, fuel enters into the carburetor by 7 to 10 pushes. –
If the primer pump is pushed excessively, an excess of gasoline returns to –
the fuel tank.
(4)
Choke
lever
Primer pump
Close
(2)
Stop
switch
(3)
High speed
Low speed
Cruise
control lever