P 10/ 35
R
epair
(5) R
emove Ball bearing 608DDW from Helical gear 14 using 1R269.
Remove Retaining ring S-12 from Helical gear 14 using 1R291. If it is difficult to remove the ring in this way,
remove the ring while pushing Retaining ring S-12 with 1R291.
Two Flat washer 12, Rubber washer 12, Spiral bevel gear 32 and Woodruff key 4 can be removed. (
Fig. 25
)
(6) Separate Grease holder from Gear section by removing two Bind CT4x12 Tapping screws. (
Fig. 25
)
(7) Hook 1R045 and 1R346 with Bearing box complete, and then push out Helical gear 14 from Bearing box complete by
turning the handle of 1R045. (
Fig. 26
)
(8) Remove Ball bearing 608DDW from Bearing box complete. (
Fig. 26
)
(9) R
emove Helical gear 27 with Steel ball 4, Gear shaft and Ball bearing 6000ZZ from Bearing box complete. (
Fig. 27
)
(10) After removing Steel ball 4 and Ball bearing 6000ZZ from Gear shaft, press down Gear shaft using 1R217 and arbor
press. (
Fig. 27A
)
DISASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Spiral bevel gear 32, Helical gears 14, Helical gears 27, Helical gears 28 (cont.)
Fig. 27
Fig. 27A
Fig. 25
Fig. 26
1R217
Steel ball 4
Arbor press
Gear shaft
Gear shaft
Helical gear 27
Ball bearing
6000ZZ
Handle of 1R045
1R346
Ball bearing 608DDW
Ball
bearing
608DDW
Retaining ring S-12
Grease holder
Helical gear 14
Flat washer 12
Rubber
washer 12
Spiral bevel
gear 32
Helical gear 14
Bearing box
complete
Woodruff key 4
Bind CT4x12
Tapping screw
(2pcs.)