P 13/ 35
R
epair
1) Remove two M4x10 Hex socket head bolts and two Flat washers 4, then remove Lock lever and Torsion spring 8. (
Fig. 38
)
2) Remove two CT4x16 Tapping screws and separate Rod 8 from Rod holder. (
Fig. 39
)
Flat
washer 4
(2pcs.)
Flat washer 4
(2pcs.)
DISASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Lock Lever Section (exclusively for the specifications with Locking mechanism of Blade
case complete at the upper dead point)
Fig. 38
Fig. 39
Fig. 41
M4x10 Hex
socket head
bolt (2pcs.)
M4x10 Hex
socket head
bolt (2pcs.)
Lock lever
Stop ring E-6
Rod holder
Rod 8
Blade case
complete
CT4x16 Tapping
screws (2pcs.)
Torsion spring 8
Lock lever
Torsion
spring 8
2mm up to 3mm
Safety cover B
Lock lever
ASSEMBLING
Hole of
Rod holder
Blade case
complete
Rod 8
Take the reverse step of disassembling.
(1) Press Rod holder against the rib of Blade case complete and secure Rod holder by tightening two CT4x16 Tapping
screws.
(2) When assembling Lock lever to Rod 8;
• Pass Rod 8 through Torsion spring 8 and insert the one end of Torsion spring 8 into the hole of Rod holder.
• Hook the other end of Torsion spring 8 with the reverse of Lock lever and align Lock lever with the step of
Rod 8 by tightening two M4x10 Hex socket head bolts and CT4x16 Tapping screws (2pcs.). (
Figs. 39, 40)
•
Adjust the clearance between Lock lever and Safety cover B to 2mm up to 3mm height by sliding Lock lever.
(
Fig. 41
)
Fig. 40
Step of Rod 8 to
align Lock lever
The other end of
Torsion spring 8
One end of
Torsion spring 8
Viewed from Rod holder