P 16/ 35
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-6. Positive lock mechanism of Turn base
DISASSEMBLING
ASSEMBLING
(1) Remove Stop ring E-7. (
Fig. 47
)
Grip 50, Compression spring 11, Flat washer 10 and Cam can be removed.
(2) Remove two CT4x16 Tapping screws and Plate from Turn base complete.
Miter lock plate B complete and Pin 6 are removed. (
Fig. 48
)
(3) Remove M6x14 H.S.Binding head screw then remove Miter lock plate in
the direction designated with black arrow. (
Fig. 49
)
(4) Remove CT4x16 Tapping screw (2pcs.) and Lock lever plate. (
Fig. 50
)
(5) While pushing Lock pin 6 in the direction of black arrow to remove
the ends of Pin 3 from the inner hooks of Lock lever, pick up Lock lever
in the direction of gray arrow shown in
Fig. 51
.
(6) Remove Pin 3 from Lock pin 6, then pull out Lock pin 6 from Lock lever
side.
Fig. 47
Fig. 48
Fig. 49
Fig. 50
Fig. 51
Take the disassembling step in reverse.
Stop ring E-7
Compression
spring 11
Flat washer 10
Grip 50
Turn base
Groove for Stop ring E-7
CT4x16 Tapping
screw (2pcs.)
Plate
Pin 6
Protrusion of Miter
lock plate B complete
Hole of Miter
lock plate A
Miter lock plate A
M5 Shoulder screw
Miter lock plate B
complete
Cam
Lock pin 6
Lock pin 6
Lock lever
Compression
spring 6
Ends of Pin 3 passed
through Lock pin 6
Lock lever
plate
Miter lock plate can be pulled
out without removing M5
Shoulder screw.
M6x14 H.S.
Binding
head screw
Miter lock plate A
Compression
spring 13
CT4x16 Tapping
screw (2pcs.)
Inner hooks of
Lock lever
Ends of Pin 3 are
removed from
the inner hooks
of Lock lever