20 ENGLISH
PARTS DESCRIPTION
►
Fig.2
1
Hex wrench
2
Adjusting bolt (for maxi
-
mum cutting capacity)
3
Adjusting screw (for
lower limit position)
4
Stopper arm
5
Wireless activation
button
6
Wireless activation lamp
7
Vacuum button
8
Lamp button
9
Blade guard
10
Kerf board
11
Grip (for turn base)
12
Grip dial (for bevel
angle)
13
Releasing lever (for turn
base)
14
Adjusting bolt (for turn
base)
15
Guide fences
16
Pointer (for miter angle)
17
Miter angle scale
18
Turn base
19
Sub base
20
Vertical vise
21
Releasing lever (for right
side bevel angle)
22
45° adjusting bolt (for
right bevel angle)
23
0° adjusting bolt (for
bevel angle)
24
Dust guide
25
Right bevel angle scale
26
Pointer (for right bevel
angle)
27
Stopper pin (for carriage
sliding)
28
Slide pole
29
Lid (for wireless unit)
-
-
-
-
-
-
►
Fig.3
1
Hole for padlock
2
Switch trigger
3
Lock-off button
4
Carry handle
5
Battery cartridge
6
Dust extraction hose
7
Left bevel angle scale
8
Pointer (for left bevel
angle)
9
Releasing lever (for 48°
bevel angle)
10
45° adjusting bolt (for left
bevel angle)
11
Shaft lock
12
Dust bag (when replaced
with dust extraction
hose)
INSTALLATION
Bench mounting
WARNING:
Ensure that the tool does not
move on the supporting surface.
Movement of the
miter saw on the supporting surface while cutting may
result in loss of control and serious personal injury.
1.
Fix the base to a level and stable surface, screw-
ing with the bolts. This helps to prevent from tipping and
possible injury.
►
Fig.4:
1.
Bolt
2.
Mounting hole
2.
Turn the adjusting bolt clockwise or counterclock
-
wise so that it comes into a contact with the floor sur
-
face to keep the tool stable.
►
Fig.5:
1.
Adjusting bolt
Installing the dust extraction hose
Connect the dust extraction hose to the tool as
illustrated.
Make sure that the elbow and the sleeve fit properly to
the ports of the tool.
►
Fig.6:
1.
Dust extraction hose
2.
Elbow
3.
Sleeve
4.
Port
To remove the elbow from the port, pull the elbow while
pressing down the lock button.
To remove the sleeve from the port, turn it clockwise
and then pull it apart.
►
Fig.7:
1.
Elbow
2.
Lock button
3.
Sleeve
4.
Port
FUNCTIONAL
DESCRIPTION
WARNING:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking the functions on
the tool.
Failure to switch off and remove the battery
cartridge may result in serious personal injury from
accidental start-up.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
tridge firmly when installing or removing battery
cartridge.
Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
►
Fig.8:
1.
Red indicator
2.
Button
3.
Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
Содержание LS002G
