![background image](http://html1.mh-extra.com/html/makita/hr4002/hr4002_technical-information_4252666006.webp)
P 6 / 20
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Tool Holder Section and Barrel Complete
R
epair
ASSEMBLE
Urethane ring 45
Urethane ring 45
Insert Tool holder into Barrel complete until Urethane ring 45
contacts to Plane bearing 32 of Barrel complete.
Flat washer 45
Tool holder
4) From the Bit installing side, assemble Flat washer 45 to Tool holder. (
Fig. 18
)
5) And then, assemble Urethane ring 45 to Tool holder from its Bit installing side. (
Fig. 18
)
Fig. 18
Fig. 19
6) Assemble Oil seal 32 to Barrel complete on the Release cover side. (Refer to Fig. 14.)
7) Mount Tool holder to Barrel complete. And insert Impact bolt into Tool holder. (
Fig. 19
)
8) Assemble the Tool holder section to Crank housing. (Refer to Fig. 10.)
9) Assemble the Chuck section, by doing the reverse step of disassembling in Page 3.
Plane bearing 32
(Integral part of Barrel complete)
Tool holder
Tool holder
Assembling of Tool holder
section is completed by
inserting Impact bolt.
Impact bolt