![background image](http://html1.mh-extra.com/html/makita/hr4002/hr4002_technical-information_4252666013.webp)
P 13 / 20
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Armature
R
epair
DISASSEMBLE
ASSEMBLE
1) Do the reverse Step of Disassembling..
1) Disassemble
Motor section as per Illustrations from Fig. 34 to Fig. 37.
2) Disassemble Gear housing complete from Crank housing complete. (Fig. 38)
3) Remove Torque limiter section together with Change plate from Gear housing complete. (Fig. 39)
4) Remove Ball bearing 6904LLU and 608DDW. Now Cup washer 8, Conical compression spring 19-2 and Driving
flange are removed from Torque limiter complete. (Fig. 40)
Note: Do not forget to assemble Baffle plate. (Refer to left Fig. 37.)
[3] -6. Torque Limiter Section
Gear housing complete
Gear housing complete is
removed together with Seal
ring.
Torque limiter
section
Change plate
Change plate
Compression spring 5: 2 pcs.
Ball bearing
6904LLU
1R269
Ball bearing 608DDW
Cup washer 8
Conical compression spring 19-2
Driving flange
Note: Do not remove this Flat washer.
It is factory assembled as an integral
part of Torque Limiter Complete.
Torque limiter complete
Fig. 38
Fig. 39
Fig. 40
Strike the edge of Crank housing complete to remove it when
Torque limiter section is left in Crank housing complete side.