P 12 / 20
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Armature
R
epair
DISASSEMBLE
1) Disassemble Handle section from Motor housing. (Fig. 2)
2) After removing Rear cover, disconnect Carbon brush from Commutator by pulling out it.
3) Remove Pan head screw M5x35. (Fig. 35)
4) Disassemble Motor housing from Gear housing complete. (Fig. 36)
5) After disassembling Motor housing, Armature stays in Gear housing complete.
Remove the Armature as illustrated in Fig. 37.
Spiral spring
Carbon brush
Rear cover
1R263
Motor housing
Tapping screw 4x18: 2 pcs.
Remove the Spring
from Carbon brush.
And pull out carbon brush to
disconnect it from Commutator.
No need to remove Carbon brush
from Brush holder unit.
Fig. 34
Fig. 35
Fig. 37
Fig. 36
Pan head
screw M5x35: 4 pcs.
Flat
washer 5: 4 pcs.
1R263
Inserting 1R263 between Gear housing complete
and Motor housing, disassemble Motor housing
from Gear housing complete, by levering up
with 1R263.
Gear housing
complete
Gear housing
complete
Strike the Gear housing complete with
Plastic hammer.
Now Armature is disassembled from
Gear housing complete.
Armature
Gear housing
complete
Remove Baffle plate.
Armature
Baffle Plate
