Makita HR4002, Техническая информация

Страница: 2 / 20

P 2 / 20
[2] LUBRICATION
Apply Makita grease R. No.00 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion, and apply Makita grease N No.2 to the portions designated with white triangle.
Fig. 1
[1] NECESSARY REPAIRING TOOLS
CAUTION: Remove the bit from the machine and disconnect for safety
before repair/ maintenance, in accordance with the instruction manual!
Code No. Description Use for
Item No. Description Lubricant Portion to lubricate
R
epair
1R003
Retaining Ring S Pliers ST-2N Disassembling / assembling Ring spring
Disassembling / assembling Ring spring 1R022 Bearing Plate (for arbor press)
1R212
Tip for Retaining Ring Pliers Attachment to 1R003, for Disassembling / assembling Ring spring
1R213 Disassembling Cylinder from Crank housing
Disassembling Motor housing from Crank housing
Cylinder Extractor
1R214 Taper Sleeve Fitting Fluoride rings on Impact bolt of Rotary hammers
1R230 1/4” Hex. Shank Bit M6 Disassembling Barrel complete from Crank housing
1R263 Bearing Extractor
Removing Ball bearings 1R269 Bearing Extractor (small)
Stabilizing the machine, when removing Cylinder 1R350 Ring 60 (3 pcs.)
Tool retainer
Impact bolt
Ring 17
Striker
Piston
Helical gear 46
Torque limiter
Change Plate
Compression spring 5
Compression spring 5
Rubber ring 17
Tool retainer
Its inside where Impact bolt contacts
Its inside where Striker and Piston reciprocate
Inside of Tool holder-Hole for Hammer bits insertion
Tool Holder
Connecting rod
19
Tool Holder
34
Its inside where Helical gear 46 and armature rotate
Its Pin portion for accepting Change plate
Crank Housing Comp.
57
Its inside where Torque limiter engages with Helical gear 46
and Armature
Gear Housing Comp.
70
Makita grease N. No.2
Makita grease R.
No.00
Makita grease R.
No.00