P
5
/ 2
4
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Chuck Section (Model HR3200, HR3210C)
R
epair
DISASSEMBLY
DISASSEMBLY
Fig. 5
Fig. 6
5x25 Tapping screw : 2 pcs.
1) Remove Controller and Handle section and then upright the machine as illustrated in
Fig. 5.
2) Disassemble Chuck section as illustrated in
Fig. 6.
Tool holder cap
Chuck cover
Ring
spring 19
Guide
washer
Tool
holder
Conical compression
spring 22-32
Remove Tool holder
cap with Slotted
screwdriver.
Chuck cover can be
removed by hand.
And then, remove
Ring spring 19.
Ring 21 can be
removed.
Remove Steel ball 7 with
magnetized Screwdriver,
while pressing down Guide
washer.
Remove Guide washer
and Conical compression
spring 22-32.
Compression spring 11
M5x20 Pan head
screw: 2 pcs.
Chuck
cover
Ring 21
Steel
ball 7
Steel ball 7: 2 pcs.
Guide
washer
Guide
washer
Screwdriver
magnetized
with 1R288
Fig. 7
Change
cover
Change
cover
While pressing down Change cover, pull off Tool holder assembly.
Tool holder guide
Tool holder assembly
Tool holder assembly
1) Remove Handle section and then upright the machine. (
Fig. 5
) Separate Tool holder assembly from the Machine. (
Fig. 7
)
Retaining ring S-28
Washer 28
[3] -1A. Chuck Section (Model HR3210FCT)
Handle section
Controller
4x18 Tapping screw: 2 pcs.
