Take the reverse step of the disassembling procedure. Refer to
Figs. 30 to 25.
7) Torque limiter section can be disassembled as illustrated in
Fig. 30
.
Ball bearing
608DDW
Ball bearing 6001LLU
Ring 10
1R269
Key 4: 2 pcs.
Spiral bevel
gear 9
Torque limiter
complete
ASSEMBLY
P 1
4
/ 2
4
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Motor Section, Torque Limiter Section
R
epair
DISASSEMBLY
Crank
housing
Gear housing
5x25 Tapping screw: 4 pcs.
Torque limiter section
Torque limiter section may be left
in Crank housing at this time.
Remove 5x25 Tapping screws. And separate Motor housing from Gear room.
Do the disassemble work on the cloth to accept the grease from Gear housing
and to provent Torque limiter from having damage.
Armature
Use cloth to accept the grease from Gear
room and to provent Torque limiter from
having damage.
Motor housing
Fig. 28
Fig. 29
6) Disassemble Armature as illustrated in
Figs. 28 and 29.
1R346
Note:
Be careful not to lose
Cup washer 18 for
Crank shaft.
Armature
Handle
of 1R045
Cup washer 18
Remove Torque limiter section by striking the Gear housing's
edge with Plastic hammer, if Torque limiter section is left on
the Gear housing.
Remove Armature from Gear housing.
Torque limiter
section
Fig. 30
